End Fed Long Wire for 160-6m Operations
14 Views
top of page
Our next meeting is Thursday, July 16, 2026, 7:00 PM, Siler Presbyterian Church, Wesley Chapel and on Zoom
Antennas
Publicยท13 members
6 meter Squalo build
This looks like the antenna that N2KZB recently built.
33 Views
2 Meter Beam Antenna
Here is the YouTube link for the "Dream Beam" antenna build. I finally got mine up on a mast with a rotator. Very pleased with result.
33 Views
Norm B - KO4CB
(21. 2.)
Tom, pleased to hear your circular quad is up and you are pleased with it. I have a Max Systems 5el, 2 meter quad [square elements] from one of the hamfests - need to assemble and install somewhere.
Gutter Mast
I'm kind of lazy, and I hate pulling out ladders, so I came up with an easy way to mount a small antenna from my gutters. I can install or remove the mast/antenna(s) from a second floor window.
The above shows my Meshtastic antenna. The mast attaches to the gutter with cheap hooks from Lowes (see picture below). Clothesline is tied to the bottom of the mast and is then attached to a weight on the ground with just enough tension to keep the mast upright. To install it, I open the window, reach out with the mast and hook it onto the gutter, and drop the clothesline to the ground. I then go outside, pull tension on the clothesline, and tie it off.
I have another mast on the other end of the house with a broadcast FM antenna and a GMRS antenna. I have had both masts uโฆ
19 Views
bottom of page
I use a 71' EF from Palomar that uses the shield as a counterpoise with a 9:1 unun. I have a choke on the coax at about 50' from the balun. It works on 160 to 6 pretty well. I've thought about building one a lot longer and will watch to see what you end up with.